Call us: 08045816301
Mitsubishi Electric FX1N-24MR-001 Programmable Controller is considered as an integral part of industrial automation process. Available in DIN rail mounting or direct mounting design choices, this PLC is suitable for performing monitoring and controlling tasks with utmost precision. This programmable controller is preferred over commonly used relay based monitoring system for its wire free operation. This Mitsubishi product can be operated at maximum 55 degree C operating temperature. Standard of this Mitsubishi Electric FX1N-24MR-001 Programmable Controller has been checked as per its diameter, output, precision level and service life.
Specification
Dielectric Withstand Voltage |
Ac Unit = 1500 v Ac 1 Min,Tested Between All Points,Terminals And Ground Dc Unit = 500 v Ac 1 |
Ground |
Class d (100 Ohm Or Less) |
Insulation Resistance |
5 m Ohm Greater Than At 500 v Dc,Tested Between All Points,Terminals And Groun |
Model No |
Mitsubishi Electric |
Noise Immunity |
1000 Vp-p,1microsecond,30 - 100 Hz,tested by noise simulator |
Operating Humidity |
35 To 85% Relative Humidity,No Condensation |
Operating Temperature |
0 To 55 Degree c (32 To 131 Degree F) |
Shock Resistance |
Conforms To Iec 68-2-27: 147m/s 2 Acceleration,Action Time: 11 Ms 3 Times In Each Direction X,Y,A |
storage Humidity |
35 To 90% Relative Humidity,No Condensation |
Storage Temperature |
-20 To 70 Degree c (-4 To 158 Degree F) |
Vibration Resistance - DIN rail Mounting |
Conforms to IEC 68-2-6; 10 - 57 Hz: 0.035 mm Half Amplitude 57 -150 Hz: 4.9 m/s 2 Acceleration Sweep |
Vibration Resistance - Direct Mounting |
Conforms To Iec 68-2-6; 10 - 57 Hz: 0.75 Mm Half Amplitude 57 - 150 Hz: 9.8 M/s 2 Acceleration Sweep |
Brand |
FX1N-24MR-001 |